18W 1800LM 6000K Car LED Inspection Work Light LED White Light Bulb

Automotive Engineering 60W LED Work Light Energy Work Light Car LED Bulb White Light

Description:
Built-in voltage regulator 12V / 24V common, widely used.
Material: Die-Cast Aluminum.
Adjustable Trunnion mounting Bracket.
The suitable design for heating elimination.
Energy-efficient and low power consumption.
The high performance of tight water-proof,dust-proof,quake-proof.

Specification:
WaterProof Level: IP67
Material: Aluminum
Power source: 18 (W)
Voltage: 12-24 (V)
Beam Type: Flood beam
Light Angle: 120 Degrees
Application: Universal
Size: 159.8mm*45.2mm*63mm
The power cord length: 30cm

Application:
Fof Lights
Daytime Running Lights
Street Lighting
Motorcycle​ Headlights
Car Dome Lights
Down Lights
Light Anti-attack

Installing Tips:
Installation of LED lighting is reasonably straight forward and can be achieved by most people with a little bit of DIYskill.
However if you are unsure how to safely wire the unit up so no damage is done to the light and/or the vehicle,
we strongly suggest you seek assistance from a qualified a person.
It is imperative that a correctly sized relay is used to operate the light, likewise it is imperative that a fuse is installed in the power circuit
and that it is sized correctly in relation to the light being installed taking into consideration the current draw of the light and any voltage
drop that may occur due to the length of the cable run.
It is common practice to install a dash mounted or similar switch to turn the light on and off.
Some choose to also switch the relay with the high beams of the vehicle; however,
if the vehicle is being used on public roads it is imperative that there is also the dash mounted
or similar switch as noted above to enable the light to be switch off when on public roads.
Package Included:
1 X  Work Light (Just a single price)